No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This section describes the default configuration of OSPFv3, which can be changed according to network requirements.

Table 7-36 describes the default configuration of OSPFv3.

Table 7-36 Default configuration of OSPFv3
Parameter Default Setting
OSPFv3 Disabled
The interval of sending Hello packets For the interface of the broadcast type, the interval for sending Hello packets is 10 seconds.
The dead interval of the OSPFv3 neighbor The dead interval of OSPFv3 neighbor is 40 seconds for the interface of broadcast type.
The period during which a switch modules keeps acting as a stub router. 500 seconds
The bandwidth reference value used to calculate the link cost. 100 Mbit/s
Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 60300

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next