No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining MSDP

Maintaining MSDP

Maintaining MSDP involves clearing MSDP peer statistics and (S, G) information in the SA cache, and monitoring MSDP running status.

Clearing Statistics on MSDP Peers

Context

When you clear statistics on MSDP peers, you can determine whether to reset the TCP connection between MSDP peers based on the actual networking environment. Resetting the TCP connection will affect MSDP running.

Statistics on MSDP peers cannot be restored after you clear them. Therefore, exercise caution when you run the command.

Procedure

  • Run the reset msdp peer [ peer-address ] command in the user view to reset the TCP connection with the specified MSDP peer and clear all statistics of the specified MSDP peer.
  • Run the reset msdp statistics [ peer-address ] command in the user view to clear the statistics of one or multiple MSDP peers but not to reset the TCP connection.
  • Run the reset msdp control-message counters [ peer peer-address ] command in the user view to clear the statistics on the received, sent, and discarded MSDP messages.

Clearing (S, G) Information in the SA Cache

Context

The (S, G) information in the SA cache cannot be restored after you clear it. Therefore, exercise caution when you run the command.

Procedure

  • Run the reset msdp sa-cache [ group-address ] command in the user view to clear the (S, G) information in the SA cache.

Monitoring the Running Status of MSDP

Context

During the routine maintenance, you can run the following commands in any view to learn the running status of MSDP.

Procedure

  • Run the display msdp brief [ state { connect | down | listen | shutdown | up } ] command to check brief information about MSDP peers.
  • Run the display msdp peer-status [ peer-address ] command to check the detailed information about MSDP peers.
  • Run the display msdp sa-cache [ group-address | source-address | as-number ] * command to check (S, G) information in the SA cache.
  • Run the display msdp sa-count [ as-number ] command to check the number of (S, G) entries in the SA cache.
  • Run the display msdp control-message counters [ peer peer-address | message-type { source-active | sa-request | sa-response | keepalive | notification | traceroute-request | traceroute-reply | data-packets | unknown-type } ] * command to check the statistics on the received, sent, and discarded MSDP packets.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57216

Downloads: 3617

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next