No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section lists references of IPv6 Transition Technology.

The following table lists the references for this document.




RFC 2464

Transmission of IPv6 Packets over Ethernet Networks


RFC 2472

IP Version 6 over PPP


RFC 2473

Generic Packet Tunneling in IPv6 Specification


RFC 2529

Transmission of IPv6 over IPv4 Domains without Explicit Tunnels


RFC 2893

Transition Mechanisms for IPv6 Hosts and Routers


RFC 3056

Connection of IPv6 Domains via IPv4 Clouds


RFC 3068

An Anycast Prefix for 6to4 Relay Routers


RFC 3484

Default Address Selection for Internet Protocol version 6 (IPv6)


RFC 3493

Basic Socket Interface Extensions for IPv6


RFC 4213

Basic Transition Mechanisms for IPv6 Hosts and Routers


Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58303

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next