No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining FCoE

Maintaining FCoE

This section describes how to check and clear FIP packet statistics, monitor FCoE running status, and debug FCoE.

Displaying Statistics on FIP Packets

Context

After the FCoE configuration is complete, run the following command in any view to check statistics on FIP packets.

Procedure

  • Run the display fcoe fip statistics [ fc-instance-name ] command to check statistics on FIP packets of the specified FC instance or all FC instances.

Clearing Statistics on FIP Packets

Context

After the reset fcoe fip statistics command is executed, statistics on FIP packets and the latest ENode logout information are cleared and cannot be restored. Confirm your action before you use this command.

Procedure

  • Run the reset fcoe fip statistics [ fc-instance-name ] command to clear statistics on FIP packets.
  • Run the reset fcoe last-offline command to clear the latest ENode logout information.

Monitoring the FCoE Running Status

Context

In routine maintenance, you can run the following commands in any view to view the FCoE running status.

Procedure

  • Run the display fcoe last-offline command to view the latest ENode logout information.
  • Run the display fcoe session [ fcoe-mac ] [ enode enode-mac | fcf fcf-mac | vlan vlan-id | interface interface-type interface-name ] * command to view the FCoE session information.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59298

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next