No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Assistants

Maintaining Assistants

This section describes how to maintain assistants.

Stopping an Assistant

Context

If an assistant is no longer needed, you can stop it.
NOTE:

Stopping a running assistant interrupts the task of the assistant. Exercise caution when you perform this operation.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ops command to enter the OPS view.
  3. Run the assistant task-name command to enter the assistant view.
  4. Run the shutdown command to stop the assistant.

    To start an assistant, run the undo shutdown command.

  5. Run the commit command to commit the configuration.

Disabling the Maintenance Assistant Function

Context

You can disable the maintenance assistant function when you do not need the functions provided by assistants.
NOTE:

Disabling the maintenance assistant function interrupts all the assistants. Exercise caution when you perform this operation.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ops command to enter the OPS view.
  3. Run the assistant scheduler suspend command to disable the maintenance assistant function.

    To enable the maintenance assistant function, run the undo assistant scheduler suspend command.

  4. Run the commit command to commit the configuration.

Uninstalling a Script or Batch File

Context

You can uninstall unnecessary scripts or batch files to release storage space on a device. If an installed script or batch file needs to be updated, uninstall it first and reinstall it after the modification.

NOTE:
  • If a file name is specified, the command uninstalls the specified file. If a directory is specified, the command uninstalls all files in the directory and its subdirectories.

  • This command cannot uninstall a script that has been bound to an assistant. To uninstall the script, unbind it from assistant first.

  • If the script bound to an assistant calls other scripts, the called scripts can be uninstalled using this command. Therefore, it is recommended that you use one script to implement required functions.

Procedure

  1. Run the ops uninstall file file-name-or-dir command to uninstall a script or batch file.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58839

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next