No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining OSPF

Maintaining OSPF

Maintaining OSPF involves resetting OSPF, and clearing OSPF statistics.

Clearing OSPF

Context

OSPF information cannot be restored after you clear it. So, confirm the action before you use the command.

To clear OSPF information, run the following reset commands in the user view.

Procedure

  • Run the reset ospf [ process-id ] counters [ neighbor [ interface-type interface-number ] [ router-id ] ] command to reset OSPF counters.

    • counters indicates OSPF counters.
    • neighbor indicates neighbor information on the specified interface.

  • Run the reset ospf [ process-id ] redistribution command in the user view to re-import routes by OSPF.
  • Run the reset gtsm statistics { all | slot-id } command in the user view to clear the GTSM statistics on the device.
  • Run the reset ospf [ process-id ] frr command in the user view to perform OSPF IP FRR calculation again.
  • Run the reset ospf [ process-id ] peer [ interface-type interface-number ] router-id command to restart OSPF peers.

Resetting OSPF

Context

The OSPF adjacency relationship between the switch moduless will be torn down after you run the reset ospf command to reset OSPF connections. So, confirm the action before you use the command.

To reset OSPF connections, run the following reset commands in the user view.

Procedure

  • Run the reset ospf [ process-id ] process command in the user view to restart the OSPF process.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59823

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next