No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

The device supports interface-based, VLAN-based, and basic QinQ-based Layer 2 protocol transparent transmission.

Table 5-48 lists the configuration task summary of Layer 2 protocol transparent transmission.

Table 5-48 Configuration task summary of Layer 2 protocol transparent transmission
Item Description Task

Configuring interface-based Layer 2 protocol transparent transmission

When each interface of a backbone device is connected to only one user network and Layer 2 protocol packets sent from the user network do not need VLAN tags, configure interface-based Layer 2 protocol transparent transmission on the interface connected to the user network. This configuration allows Layer 2 protocol packets to be transparently transmitted on the backbone network.

Configuring Interface-based Layer 2 Protocol Transparent Transmission

Configuring VLAN-based Layer 2 protocol transparent transmission

When each interface of a backbone device is connected to multiple user networks and Layer 2 protocol packets sent from user networks contain VLAN tags, configure VLAN-based Layer 2 protocol transparent transmission. This configuration allows Layer 2 protocol packets to be transparently transmitted on the backbone network.

Configuring VLAN-based Layer 2 Protocol Transparent Transmission

Configuring basic QinQ-based Layer 2 protocol transparent transmission

When each interface of a backbone device is connected to multiple user networks and Layer 2 protocol packets sent from user networks contain VLAN tags, you can configure basic QinQ-based Layer 2 protocol transparent transmission. This configuration allows Layer 2 protocol packets to be transparently transmitted on the backbone network and reduces VLAN IDs that the carrier uses.

Configuring Basic QinQ-based Layer 2 Protocol Transparent Transmission

Translation
Download
Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 60733

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next