No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V100R001C01 Planning Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPv4 Networking Example

IPv4 Networking Example

An enterprise uses the object storage service. The network is shown in Figure 3-11, in which both the front-end service and back-end storage networks are InfiniBand networks.

Figure 3-11  Networking example
Table 3-4, Table 3-5, and Table 3-6 show the IP address planning when three P25/P36/P12 nodes are deployed.
Table 3-4  Management network IP address planning

Management IP Address

A total of eight management IP addresses are required for interconnection with the management network, of which six are official and two are temporary.

  

Port

IP Address

Subnet Mask

Gateway

Node 1

IPMI

10.110.100.11

255.255.255.0

10.110.100.1

Node 2

IPMI

10.110.100.12

255.255.255.0

10.110.100.1

Node 3

IPMI

10.110.100.13

255.255.255.0

10.110.100.1

OceanStor 9000 management IP address

Floating among the NIC0 ports of the three nodes

10.110.100.100

255.255.255.0

10.110.100.1

Management IP address of the management network GE switch

Logical management port

10.110.100.102

255.255.255.0

10.110.100.1

POE floating management IP address

Logical management port

When object storage service (compatible with Amazon S3 APIs) is deployed, this port is used for object storage service (compatible with Amazon S3 APIs) to provide the external service provisioning interface service of object storage. When object storage service (compatible with OpenStack Swift APIs) is deployed, this port is not required.

10.110.100.103

255.255.255.0

10.110.100.1

Temporary IP address for software package uploading during deployment

NIC0 port of the node being deployed

10.110.100.253

255.255.255.0

10.110.100.1

Temporary IP address for software package uploading during deployment

Port of the client being deployed

10.110.100.254

255.255.255.0

10.110.100.1

Table 3-5  Front-end service network IP address planning

Front-End Service IP Address

You need to assign two static front-end service IP addresses for each node for interconnection with the front-end service network, six IP addresses in total.

  

Port

IP Address

Subnet Mask

Gateway

Front-end service IP address of node 1

A0-1

192.168.100.11

255.255.255.0

192.168.100.1

B3-1

192.168.100.21

255.255.255.0

192.168.100.1

Front-end service IP address of node 2

A0-1

192.168.100.12

255.255.255.0

192.168.100.1

B3-1

192.168.100.22

255.255.255.0

192.168.100.1

Front-end service IP address of node 3

A0-1

192.168.100.13

255.255.255.0

192.168.100.1

B3-1

192.168.100.23

255.255.255.0

192.168.100.1

Table 3-6  Back-end storage network IP address planning

Back-End Storage IP Address

A total of seven back-end storage IP addresses are required for interconnection with the back-end storage network. Default IP addresses and subnet masks are recommended. You are advised not to change them unless they conflict with the existing IP addresses.

  

Port

IP Address

Subnet Mask

Back-end storage IP address of node 1

A0-0

172.16.0.1

255.255.0.0

B3-0

172.16.0.2

255.255.0.0

Back-end storage IP address of node 2

A0-0

172.16.0.3

255.255.0.0

B3-0

172.16.0.4

255.255.0.0

Back-end storage IP address of node 3

A0-0

172.16.0.5

255.255.0.0

B3-0

172.16.0.6

255.255.0.0

gauss floating management IP address

Logical management port

When object storage service is deployed, this port is used for object storage service (compatible with Amazon S3 APIs) and object storage service (compatible with OpenStack Swift APIs) to provide the internal database service.

172.16.0.100

255.255.0.0

Download
Updated: 2018-10-27

Document ID: EDOC1000042140

Views: 8828

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next