No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

LUN Copy Feature Guide 09

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, and 6900 V3 Storage System V300R001

"This document describes the principles and application scenarios of LUN copy, and how to configure and manage LUN copy."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Operations

Configuration Operations

After planning the network and service takeover, complete the configuration on the DeviceManager to enable data migration using LUN copy.

Prerequisites

  • The application server correctly connects to the device A and device B.
  • The device A connects normally to the device Busing a Fibre Channel host port.

Procedure

  1. Check that the LUN copy license is valid.

    Operation path: > More > Manage License Files > Active License.

  2. Create a target LUN in the device B.
    1. Create a disk domain.

      Operation path: > Disk Domain > Create.

    2. Create a storage pool.

      Operation path: > Storage Pool > Create.



    3. Create a target LUN.

      Operation path: > LUN > Create.

  3. Establish the logical connection between the device A and device B.

    Operation path: > Remote Device > Add Remote Device.

    NOTE:
    • If remote devices are OceanStor 18000 series V1R1C20, T series V2R2C20, or OceanStor V3 series V3R1C10 or later, you need to use the machine-machine user. The username is mm_user, and the default password is mm_user@storage.
    • If remote devices are OceanStor 18000 series V1R1C10, T series V2R2C10, or OceanStor V3 series V3R1C00 or earlier, you need to use the password of the super administrator or administrator account on the remote device.

  4. Add a link.

    Operation path: > Remote Device > Add Link.



  5. Create a full LUN copy task in the device B.

    Operation path: > LUN Copy > Create.

Translation
Download
Updated: 2019-01-28

Document ID: EDOC1000045750

Views: 10569

Downloads: 344

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next