Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing Installation Tools and Accessories
Table 3-5 and Table 3-6 show the tools and accessories required for installing a switch.
Table 3-5 Installation tools
| Tool | Description | Picture |
|---|---|---|
| ESD wrist strap | Used to prevent electrostatic discharge. Wear the strap on your wrist and insert the cord into the ESD jack on the cabinet. |  |
| ESD gloves | Used to prevent electrostatic discharge. |  |
| Protective gloves | Used to protect hands against lacerations and abrasions. |  |
| Utility knife | Used to cut open cartons. |  |
| Measuring tape | Used to measure distance. |  |
| Marker | Used to mark the installation position of components. |  |
| Flat-head screwdriver | Used to turn slotted-head screws and bolts. |  |
| Phillips screwdriver | Used to turn cross-head screws and bolts. |  |
| Diagonal pliers | Used to cut insulation tubes and cables. |  |
| Network cable tester | Used to test the connectivity of network cables. |  |
| Multimeter | Used to test the electrical characteristics, such as voltage, current, and resistance, of the switch, cabinet, and cables. |  |
| Hammer drill | Used to drill holes with appropriately sized drill bits (selected based on depth of holes and type of expansion bolts). |  |
| Adjustable wrench | Used to turn hex or square bolts and nuts. |  |
