No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2L16QX2H-16-Port 40GBASE-X Interface Card (X2H, QSFP+)

ET1D2L16QX2H-16-Port 40GBASE-X Interface Card (X2H, QSFP+)

Version Mapping

Table 8-438 Switch chassis and software versions matching the card

Card Name

S12700 Chassis


Supported in V200R012C00 and later versions


The ET1D2L16QX2H can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 8-203 Appearance of the ET1D2L16QX2H


Table 8-439 Functions of the ET1D2L16QX2H
Function Description

Basic function

  • Provides sixteen 40GE Ethernet optical ports for data access and switching.

  • Allows a 40GE port to split into four 10GE ports.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping



A 40GE network can be established by installing 40GE cards on aggregation switches and core switches, as shown in Figure 8-204.

Figure 8-204 40GE cards deployed on a campus network

A 40GE network with 40GE cards deployed has the following advantages:

  • Provides higher bandwidth.
  • Is compatible with 10GE networks because a 40GE interface can be split into four 10GE interfaces. This feature enables customers to seamlessly upgrade their 10GE networks to 40GE networks.
  • Has a higher efficiency and lower packet loss ratio than a 40GE network established by bundling four 10GE lines for load balancing.

The 40GE cards are used on networks that need to provide high bandwidth, for example, video surveillance bearer networks and high-definition (HD) video conference bearer networks. The following uses an HD video conference bearer network as an example to describe application of 40GE cards.

Transmission of HD video and voice flows consumes high bandwidth on a network, especially on the aggregation layer and core layer. The bandwidth of aggregation and core devices usually becomes a bottleneck on an HD video conference bearer network. As shown in Figure 8-204, 40GE cards are deployed on the aggregation layer and core layer to transmit HD video and voice flows faster, more efficiently, with fewer packets lost. This deployment ensures sufficient bandwidth for the HD video conference bearer network and delivers high quality HD images and voice.

Usage Constraints

The ET1D2L16QX2H interface card is not supported in an S12704 chassis configured with ET1D2SFUC000 Switch Fabric Units (SFUs). If you insert an ET1D2SFUC000 into the S12704 chassis after an ET1D2L16QX2H is registered, the ET1D2L16QX2H will be powered off.

Indicators and Ports

Figure 8-205 Indicators on the ET1D2L16QX2H panel

Table 8-440 Indicators on the ET1D2L16QX2H panel








Steady on: A link has been established on the port.

Blinking: The port is transmitting and receiving data.


RUN/ALM: running status indicator


Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.


Steady on: The card has failed and the fault requires manual intervention.


Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 8-206 Ports on the ET1D2L16QX2H panel

1 Sixteen 40GBASE-X ports

When multiple QSFP+ cables are connected to an ET1D2L16QX2H card, divide all the cables on the card into two bundles. Route the two bundles in two layers through the cable management frame to ensure that the bend radius of the cables is in the allowed range.

40GBASE-X port

Table 8-441 lists attributes of a 40GBASE-X port.

Table 8-441 40GBASE-X port attributes
Attribute Description
Connector type QSFP+
Optical attributes

Depend on the QSFP+ optical module, QSFP+ - QSFP+ high-speed cable (1 m, 3 m, 5 m), QSFP+ - 4*SFP+ high-speed cable (1 m, 3 m, 5 m) or QSFP+ AOC cable used.

For the optical modules supported by the ET1D2L16QX2H and their attributes, see 40GE QSFP+ Optical Modules.
Standards compliance IEEE802.3ba
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol IP


Table 8-442 Specifications of the ET1D2L16QX2H



Physical specifications

  • Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.)
  • Weight: 5.7 kg ( 12.57 lb)
  • Maximum power consumption: 300.84 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-443 Ordering information
Part Number Card Description Card Model
03032TKR 16-port 40GBASE-X interface card (X2H, QSFP+) ET1D2L16QX2H
Updated: 2019-12-11

Document ID: EDOC1000047496

Views: 214302

Downloads: 2018

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next