No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LST7G48TX5S0-48-port 10/100/1000BASE-T interface card (X5S, M, RJ45)

LST7G48TX5S0-48-port 10/100/1000BASE-T interface card (X5S, M, RJ45)

Version Mapping

Table 8-156 Switch chassis and software versions matching the card

Card Name

S12700 Chassis

LST7G48TX5S0

Supported in V200R019C00 and later versions

Introduction

The LST7G48TX5S0 provides high performance, large entry sizes, and a large buffer for data switching. This card is highly integrated and has a large port density.

The LST7G48TX5S0 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 08 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 8-80 Appearance of the LST7G48TX5S0

Functions

The LST7G48TX5S0 provides the following functions:
  • Communicates with the MPU and works under the control of the MPU.
  • Searches for routes and destination addresses of data packets for forwarding.
  • Forwards data packets.
Table 8-157 Functions of the LST7G48TX5S0

Function

Description

Basic functions

Provides forty-eight GE electrical ports for data access and line-rate switching.

Forwarding speed

48 Gbit/s

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

The LST7G48TX5S0 is hot swappable.

Indicators and Ports

Figure 8-81 Indicators on the LST7G48TX5S0 panel

Table 8-158 Indicators on the LST7G48TX5S0 panel

Number

Indicator

Color

Description

1

LINK/ACT indicator of an upper electrical port

Green

Steady on: A link has been established on the port.

Blinking: The port is transmitting and receiving data.

2

LINK/ACT indicator of a lower electrical port

3

RUN/ALM: running status indicator

Green

Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 8-82 Ports on the LST7G48TX5S0 panel

1

Forty-eight 10/100/1000BASE-T ports

10/100/1000BASE-T port

Table 8-159 describes the attributes of a 10/100/1000BASE-T port.

Table 8-159 10/100/1000BASE-T electrical port attributes

Attribute

Description

Connector type

RJ45

Standards compliance

IEEE 802.3ab

Frame format

Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Network protocol

IP

Specifications

Table 8-160 Specifications of the LST7G48TX5S0

Item

Description

Physical specifications

  • Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.)
  • Weight: 3.27 kg (7.21 lb)
  • Maximum power consumption: 66 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-161 Ordering information

Part Number

Card Name

Card Model

03033FEY

48-port 10/100/1000BASE-T interface card (X5S, M, RJ45)

LST7G48TX5S0

Translation
Download
Updated: 2019-12-11

Document ID: EDOC1000047496

Views: 215272

Downloads: 2022

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next