No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
User Manuals For ACU2, NGFW Module, and IPS Module

User Manuals For ACU2, NGFW Module, and IPS Module

The S12700 supports service cards, including ACU2, Intrusion Protection System (IPS) module, and Next-Generation Firewall (NGFW) module.

Each service card connects to a switch through two internal 20GE Ethernet links.

Services need to be configured on both the switch and service card; otherwise, the service card cannot work normally.

For the commands and configuration procedures used on the switch, see the Command Reference and Configuration Guide of switch products. Unless otherwise specified, the commands and configuration procedures used on the Ethernet ports of switches and service cards are identical.

For the commands and configuration procedures used on the service card, see the user manuals of the service card.

Table 7-488 lists the minimum software versions of the ACU2, NGFW module, and IPS module matching the S12700. The minimum switch version matching the ACU2, NGFW module, and IPS module is V200R005C00.
Table 7-488 Minimum version of the ACU2, NGFW module, and IPS module matching the S12700
Service Card Minimum Version
ACU2 V200R005C00
NGFW module V100R001C10
IPS module V100R001C10

ACU2

The Access Controller Unit (ACU2) is supported by the S12700. An ACU2 is a card installed on a switch, and can be used as an independent wireless access controller (AC).

For the hardware description and service configuration of the ACU2, see ACU2 Product Documentation of the related version.

  • For hardware information about the ACU2, see Installation - Hardware Installation and Maintenance Guide - Access Controllers - Hardware Installation and Maintenance Guide (ACU2).
  • For the traffic import configuration and service configuration of the ACU2, see Configuration - CLI-based Configuration - ACU2 Configuration Guide. In "ACU2 Configuration Guide", read "Configuring Communication Between ACU2 and a Switch" and "Example for Configuring WLAN Services on a Small-Scale Network (ACU2)."

NGFW Module

The NGFW module is available for the S12700. After an NGFW module is installed on a switch, the switch provides the firewall, NAT, and VPN functions.

The NGFW module models include ET1D2FW00S00, ET1D2FW00S01, and ET1D2FW00S02.

For details about the NGFW module, see the NGFW Module Product Documentation of the required version.
  • For hardware information about the NGFW module, see Hardware Guide (NGFW Module).
  • For initial deployment (such as login and traffic import) of the NGFW module on the switch, see Deployment Guide (NGFW Module).
  • For service configuration of the NGFW module, see Administrator Guide.

IPS Module

The IPS module available for the S12700 provides the intrusion defense function. After an IPS module is installed on a switch, the switch provides the intrusion defense, antivirus, and anti-DDoS functions.

The IPS module model is ET1D2IPS0S00.

For details about the IPS module, see IPS Module Product Documentation of the required version.
  • For hardware information about the IPS module, see Hardware Guide.
  • For initial deployment (such as login and traffic import) of the IPS module on the switch, see Deployment Guide.
  • For service configuration of the IPS module, see Administrator Guide.
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1000047496

Views: 185944

Downloads: 1914

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next