No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Table 10-111 Technical specifications



Transceiver form factor


Transmission speed


Center wavelength (nm)

1295, 1300, 1304, 1309

Standards compliance

Non-standard and compatible with the 100GBASE-ER4

Connector type


Applicable cable and maximum transmission distance

Single-mode fiber (G.652):
  • Disables the RS-FEC function: 30 km
  • Enables the RS-FEC function: 40 km

Transmit power (dBm)

-2.5 to +2.9

Maximum receiver sensitivity (dBm)


Overload power (dBm)


Extinction ratio (dB)


Operating temperature

0°C to 70°C (32°F to 158°F)

Part number


This module can only be used on a switch running V200R012C00 or a later version.

The RS-FEC function can be enabled on this module in V200R019C00 or a later version.

Updated: 2019-12-11

Document ID: EDOC1000047496

Views: 215399

Downloads: 2022

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next