No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2X04XEC1-4-Port 10GBASE-X Interface Card (EC, XFP)

ET1D2X04XEC1-4-Port 10GBASE-X Interface Card (EC, XFP)

Version Mapping

Table 8-312 Switch chassis and software versions matching the card

Card Name

S12704 Chassis

S12708 and S12712 Chassis

S12710 Chassis


Supported in V200R008C00 and later versions

Supported in V200R005C00 and later versions

Supported in V200R010C00 and later versions


The ET1D2X04XEC1 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 8-141 Appearance of the ET1D2X04XEC1


Table 8-313 Functions of the ET1D2X04XEC1
Function Description

Basic function

Provides four 10GE optical ports for data transmission and line-rate switching.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

The ET1D2X04XEC1 is hot swappable.

Indicators and Ports

Figure 8-142 Indicators on the ET1D2X04XEC1 panel

Table 8-314 Indicators on the ET1D2X04XEC1 panel








Blinking: The port is transmitting and receiving data.




Steady on: A link has been established on the port.


RUN/ALM: running status indicator


Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.


Steady on: The card has failed and the fault requires manual intervention.


Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 8-143 Ports on the ET1D2X04XEC1 panel

1 Four 10GBASE XFP optical ports
10GBASE XFP optical port

Table 8-315 lists the attributes of a 10GBASE XFP optical port.

Table 8-315 10GBASE XFP optical port attributes
Attribute Description
Connector type XFP
Optical port attributes

Depend on the XFP optical module used.

For details about the optical modules supported by the ET1D2X04XEC1 and their attributes, see 10GE XFP Optical Modules, 10GE-CWDM XFP Optical Modules, and 10GE-DWDM XFP Optical Modules.
Standards compliance IEEE 802.3ae
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol IP


Table 8-316 Specifications of the ET1D2X04XEC1



Physical specifications

  • Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.)
  • Weight: 2.28 kg (5.03 lb)
  • Maximum power consumption: 75 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-317 Order information
Part Number Card Description Card Model
03030SGS 4-port 10GBASE-X interface card (EC, XFP) ET1D2X04XEC1
Updated: 2019-12-11

Document ID: EDOC1000047496

Views: 214274

Downloads: 2018

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next