No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2T36SEA0-36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X Interface Card (EA, RJ45/SFP)

ET1D2T36SEA0-36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X Interface Card (EA, RJ45/SFP)

Version Mapping

Table 8-106 Switch chassis and software versions matching the card

Card Name

S12704 Chassis

S12708 and S12712 Chassis

S12710 Chassis

ET1D2T36SEA0

Supported in V200R008C00 and later versions

Supported in V200R005C00 and later versions

Supported in V200R010C00 and later versions

Introduction

The ET1D2T36SEA0 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 8-56 Appearance of the ET1D2T36SEA0

Functions

Table 8-107 Functions of the ET1D2T36SEA0

Function

Description

Basic function

Provides thirty-six 10M/100M/1000M Ethernet electrical ports and twelve 100M/1000M Ethernet optical ports for data transmission and line-rate switching.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot Swap

The ET1D2T36SEA0 is hot swappable.

Indicators and Ports

Figure 8-57 Indicators on the ET1D2T36SEA0 panel

Table 8-108 Indicators on the ET1D2T36SEA0 panel

Number

Indicator

Color

Description

1

ACT indicator of a lower optical port

Yellow

Blinking: The port is transmitting and receiving data.

2

ACT indicator of an upper optical port

3

LINK indicator of a lower optical port

Green

Steady on: A link has been established on the port.

4

LINK indicator of an upper optical port

5

LINK/ACT indicator of an upper electrical port

Green

Steady on: A link has been established on the port.

Blinking: The port is transmitting and receiving data.

6

LINK/ACT indicator of a lower electrical port

7

RUN/ALM: running status indicator

Green

Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 8-58 Ports on the ET1D2T36SEA0 panel

1

Twelve 100/1000BASE-X optical ports

2

Thirty-six 10/100/1000BASE-T electrical ports

100/1000BASE-X optical ports

Table 8-109 lists the attributes of a 100/1000BASE-X optical port with an optical module installed.

Table 8-109 Optical port attributes (optical module)

Attribute

Description

Connector type

SFP

Optical port attributes

Depend on the SFP optical module used.

For details about optical modules supported by the ET1D2T36SEA0 and their attributes, see FE SFP/eSFP Optical Modules, GE eSFP Optical Modules, GE-CWDM eSFP Optical Modules, and GE-DWDM eSFP Optical Modules.

Standards compliance

IEEE 802.3z

Frame format

Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Network protocol

IP

Table 8-110 lists the attributes of a 100/1000BASE-X optical port with a copper module installed.

Table 8-110 Optical port attributes (copper module)

Attribute

Description

Connector type

SFP

Optical port attributes

Depend on the SFP copper module used.

For details on the copper modules supported by the cards and attributes of the copper modules, see GE SFP Copper Modules (10 Mbit/s, 100 Mbit/s and 1000 Mbit/s rates).

Standards compliance

IEEE 802.3ab

Frame format

Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Network protocol

IP

10/100/1000BASE-T electrical ports

Table 8-111 lists the attributes of a 10/100/1000BASE-T electrical port.

Table 8-111 10/100/1000BASE-T electrical port attributes

Attribute

Description

Connector type

RJ45

Standards compliance

IEEE 802.3ab

Frame format

Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Network protocol

IP

Specifications

Table 8-112 Specifications of the ET1D2T36SEA0

Item

Description

Physical specifications

  • Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.)
  • Weight: 2.50 kg (5.51 lb)
  • Maximum power consumption: 62 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-113 Ordering information

Part Number

Card Description

Card Model

03030SGX

36-port 10/100/1000BASE-T and 12-port 100/1000BASE-X interface card (EA, RJ45/SFP)

ET1D2T36SEA0

Translation
Download
Updated: 2019-12-11

Document ID: EDOC1000047496

Views: 214280

Downloads: 2018

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next