No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2G48TEC0-48-Port 10/100/1000BASE-T Interface Card (EC, RJ45)

ET1D2G48TEC0-48-Port 10/100/1000BASE-T Interface Card (EC, RJ45)

Version Mapping

Table 7-127  Switch chassis and software versions matching the card

Card Name

S12704 Chassis

S12708 and S12712 Chassis

S12710 Chassis

ET1D2G48TEC0

Supported in V200R008C00 and later versions

Supported in V200R005C00 and later versions

Supported in V200R010C00 and later versions

Introduction

The ET1D2G48TEC0 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 7-67  Appearance of the ET1D2G48TEC0

Functions

Table 7-128  Functions f the ET1D2G48TEC0
Function Description

Basic function

Provides forty-eight GE electrical ports for data transmission and line-rate switching.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

The ET1D2G48TEC0 is hot swappable.

Indicators and Ports

Figure 7-68  Indicators on the ET1D2G48TEC0 panel

Table 7-129  Indicators on the ET1D2G48TEC0 panel

Number

Indicator

Color

Description

1

LINK/ACT indicator of an upper electrical port

Green

Steady on: A link has been established on the port.

Blinking: The port is transmitting and receiving data.

2

LINK/ACT indicator of a lower electrical port

3

RUN/ALM: running status indicator

Green

Steady on: The card has been powered on, but the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 7-69  Ports on the ET1D2G48TEC0 panel

1 Forty-eight 10/100/1000BASE-T electrical ports
10/100/1000BASE-T electrical ports

Table 7-130 lists the attributes of a 10/100/1000BASE-T electrical port.

Table 7-130  10/100/1000BASE-T electrical port attributes
Attribute Description
Connector type RJ45
Standards compliance IEEE 802.3ab
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol IP

Specifications

Table 7-131  Specifications of the ET1D2G48TEC0

Item

Description

Physical specifications

  • Dimensions (W x D x H): 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.)
  • Weight: 2.66 kg (5.86 lb)
  • Maximum power consumption: 68 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 7-132  Ordering information
Part Number Card Description Card Model
03030SGP 48-port 10/100/1000BASE-T interface card (EC, RJ45) ET1D2G48TEC0
Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000047496

Views: 141424

Downloads: 1728

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next