No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is an Optical Module

What Is an Optical Module

On an optical network, a sender needs to convert electrical signals into optical signals before sending them to a receiver, and the receiver needs to convert received optical signals into electrical signals. An optical module is a component that completes electrical/optical conversion on an optical network. Figure 9-2 shows the structure of an optical module.

Figure 9-2  Structure of an optical module (using an SFP/eSFP optical module as an example)
1. Handle 2. Receiver 3. Transmitter
4. Shell 5. Label 6. Dust plug
7. Spring 8. Connector -

Figure 9-3 shows an SFP/eSFP optical module.

Figure 9-3  SFP/eSFP optical module

Figure 9-4 shows the appearance of an SFP+ optical module.

Figure 9-4  Appearance of an SFP+ optical module
Figure 9-5 and Figure 9-6 show the appearance of a QSFP+ optical module.
Figure 9-5  Appearance of a QSFP+ optical module (for LC optical fibers)
Figure 9-6  Appearance of a QSFP+ optical module (for MPO optical fibers)

The side with an L-shaped notch close to the connector is the top of a QSFP+ optical module, as shown in Figure 9-5. When connecting a QSFP+ optical module to a port, keep the top side upward. Do not insert the QSFP+ optical module upside down.

Currently, there is no formal standard for 40G Ethernet. Therefore, a device may not display complete diagnostic information about 40GE optical modules. This is an acceptable fact in the telecommunications industry and does not affect functions of 40GE optical modules.

Figure 9-7 shows the appearance of a CSFP optical module.

Figure 9-7  Appearance of a CSFP optical module

Figure 9-8 shows the appearance of an XFP module.

Figure 9-8  Appearance of an XFP optical module
NOTE:
The SFP+ and XFP optical modules are 10GE hot-pluggable optical modules. Compared with the SFP+ optical modules, the XFP optical modules have a larger caliber.

Figure 9-9 and Figure 9-10 show CFP optical modules for different optical fibers.

Figure 9-9  CFP 100GE optical module (for LC optical fibers)
Figure 9-10  CFP 100GE optical module (for MPO optical fibers)
Figure 9-11 and Figure 9-12 show the appearance of a QSFP28 optical module.
Figure 9-11  Appearance of a QSFP28 optical module (for MPO optical fibers)
Figure 9-12  Appearance of a QSFP28 optical module (for LC optical fibers)
Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000047496

Views: 126868

Downloads: 1690

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next