No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2C02FEE0-2-Port 100GBASE-X Interface Card (EE, CFP)

ET1D2C02FEE0-2-Port 100GBASE-X Interface Card (EE, CFP)

Version Mapping

Table 7-475  Switch chassis and software versions matching the card

Card Name

S12704, S12708 and S12712 Chassis

S12710 Chassis

ET1D2C02FEE0

Supported in V200R008C00 and later versions

Supported in V200R010C00 and later versions

Introduction

The ET1D2C02FEE0 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 7-223  Appearance of the ET1D2C02FEE0

Functions

Table 7-476  Functions of the ET1D2C02FEE0
Function Description

Basic functions

Provides two 100GE optical ports for data transmission and switching.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

Supported

Indicators and Ports

Figure 7-224  Indicators on the ET1D2C02FEE0 panel

Table 7-477  Indicators on the ET1D2C02FEE0 panel

Number

Indicator

Color

Description

1

When a 100GE port is not split, this indicator shows the status of the 100GE port.

Green

Steady on: A link has been established on the 100GE port.

Blinking: The 100GE port is transmitting and receiving data.

2

When a 100GE port is split into two 40GE ports, indicators 0 and 1 show the status of the 40GE ports.

Green

When indicator 0 turns on, it shows the status of the first 40GE port derived from the 100GE port. When indicator 1 turns on, it shows the status of the second 40GE port.

Steady on: A link has been established on the 40GE port.

Blinking: The 40GE port is transmitting and receiving data.

3

When a 100GE port is split into ten 10GE ports, indicators 0 to 9 show the status of the 10GE ports.

Green

When indicator 0 turns on, it shows the status of the first 10GE port derived from the 100GE port. Similarly, the other indicators turn on in sequence to show status of the rest of 10GE ports.

Steady on: A link has been established on the 10GE port.

Blinking: The 10GE port is transmitting and receiving data.

4

RUN/ALM: running status indicator

Green

Steady on: The card has been powered on, but the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 7-225  Ports on the ET1D2C02FEE0 panel

1 Two 100GE optical ports
100GE optical port

Table 7-478 lists the attributes of a 100GE optical port.

Table 7-478  Attributes of a 100GE optical port
Attribute Description
Connector type

CFP

Optical port attributes

Depend on the 40GE CFP Optical Modules and 100GE CFP Optical Modules used

Applicable cable

CFP optical module and LC optical fiber

CFP optical module and MPO optical fiber (MPO-MPO, MPO-2*MPO, or MPO-10*DLC optical fiber)

Specifications

Table 7-479  Specifications of the ET1D2C02FEE0

Item

Description

Physical specifications

  • Dimensions (W x D x H): 394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.)
  • Weight: 4.20 kg (9.26 lb)
  • Maximum power consumption: 339 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to 158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 7-480  Ordering information
Part Number Card Description Card Model
03030WVE 2-port 100GBASE-X interface card (EE, CFP) ET1D2C02FEE0
Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000047496

Views: 128984

Downloads: 1699

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next