No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2L02QSC0-2-Port 40GBASE-X Interface Card (SC, QSFP+)

ET1D2L02QSC0-2-Port 40GBASE-X Interface Card (SC, QSFP+)

Version Mapping

Table 7-358  Switch chassis and software versions matching the card

Card Name

S12704 Chassis

S12708 and S12712 Chassis

S12710 Chassis

ET1D2L02QSC0

Supported in V200R008C00 and later versions

Supported in V200R005C00 and later versions

Supported in V200R010C00 and later versions

Introduction

The ET1D2L02QSC0 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 7-159  Appearance of the ET1D2L02QSC0

Functions

Table 7-359  Functions of the ET1D2L02QSC0
Function Description

Basic function

  • Provides two 40GE optical ports for data transmission and line-rate switching.

  • Allows a 40GE port to split into four 10GE ports.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

The ET1D2L02QSC0 is hot swappable.

Application

A 40GE network can be established by installing 40GE cards on aggregation switches and core switches, as shown in Figure 7-160.

Figure 7-160  40GE cards deployed on a campus network

A 40GE network with 40GE cards deployed has the following advantages:

  • Provides higher bandwidth.
  • Is compatible with 10GE networks because a 40GE interface can be split into four 10GE interfaces. This feature enables customers to seamlessly upgrade their 10GE networks to 40GE networks.
  • Has a higher efficiency and lower packet loss ratio than a 40GE network established by bundling four 10GE lines for load balancing.

The 40GE cards are used on networks that need to provide high bandwidth, for example, video surveillance bearer networks and high-definition (HD) video conference bearer networks. The following uses an HD video conference bearer network as an example to describe application of 40GE cards.

Transmission of HD video and voice flows consumes high bandwidth on a network, especially on the aggregation layer and core layer. The bandwidth of aggregation and core devices usually becomes a bottleneck on an HD video conference bearer network. As shown in Figure 7-160, 40GE cards are deployed on the aggregation layer and core layer to transmit HD video and voice flows faster, more efficiently, with fewer packets lost. This deployment ensures sufficient bandwidth for the HD video conference bearer network and delivers high quality HD images and voice.

Indicators and Ports

Figure 7-161  Indicators on the ET1D2L02QSC0 panel

Table 7-360  Indicators on the ET1D2L02QSC0 panel

Number

Indicator

Color

Description

1

ACT

Yellow

Blinking: The port is transmitting and receiving data.

2

LINK

Green

Steady on: A link has been established on the port.

3

RUN/ALM: running status indicator

Green

Steady on: The card has been powered on, but the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 7-162  Ports on the ET1D2L02QSC0 panel

1 Two 40GE BASE-X optical ports
40GE BASE-X optical port

Table 7-361 lists the attributes of a 40GE BASE-X optical port.

Table 7-361  40GE BASE-X optical port attributes
Attribute Description
Connector type QSFP+
Optical port attributes

Depend on the QSFP+ optical module, QSFP+ - QSFP+ high-speed cable (1 m, 3 m, 5 m), QSFP+ - 4*SFP+ high-speed cable (1 m, 3 m, 5 m) or QSFP+ AOC cable used.

For details on optical modules supported by the ET1D2L02QSC0 and their attributes, see 40GE QSFP+ Optical Modules.
Standards compliance IEEE802.3ba
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol IP

Specifications

Table 7-362  Specifications of the ET1D2L02QSC0

Item

Description

Physical specifications

  • Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.)
  • Weight: 2.50 kg (5.51 lb)
  • Maximum power consumption: 88 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 7-363  Ordering information
Part Number Card Description Card Model
03030SHE 2-port 40GBASE-X interface card (SC, QSFP+) ET1D2L02QSC0
Translation
Download
Updated: 2019-06-21

Document ID: EDOC1000047496

Views: 145738

Downloads: 1752

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next