No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Hardware Description

This document describes hardware components of the S12700, including the cabinet, chassis, power supply facilities, fan modules, cards, cables, and pluggable modules for interfaces. You can find useful information about S12700 hardware components from this document.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ET1D2G48TEA0-48-Port 10/100/1000BASE-T Interface Card (EA, RJ45)

ET1D2G48TEA0-48-Port 10/100/1000BASE-T Interface Card (EA, RJ45)

Version Mapping

Table 8-114 Switch chassis and software versions matching the card

Card Name

S12704 Chassis

S12708 and S12712 Chassis

S12710 Chassis

ET1D2G48TEA0

Supported in V200R008C00 and later versions

Supported in V200R005C00 and later versions

Supported in V200R010C00 and later versions

Introduction

The ET1D2G48TEA0 can be installed in:

  • Slots 01 to 04 in an S12704 chassis.
  • Slots 01 to 08 in an S12708 chassis.
  • Slots 01 to 10 in an S12710 chassis.
  • Slots 01 to 12 in an S12712 chassis.
Figure 8-59 Appearance of the ET1D2G48TEA0

Functions

Table 8-115 Functions of the ET1D2G48TEA0
Function Description

Basic function

Provides forty-eight GE electrical ports for data transmission and line-rate switching.

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Hot swapping

The ET1D2G48TEA0 is hot swappable.

.

Indicators and Ports

Figure 8-60 Indicators on the ET1D2G48TEA0 panel

Table 8-116 Indicators on the ET1D2G48TEA0 panel

Number

Indicator

Color

Description

1

LINK/ACT indicator of an upper electrical port

Green

Steady on: A link has been established on the port.

Blinking: The port is transmitting and receiving data.

2

LINK/ACT indicator of a lower electrical port

3

RUN/ALM: running status indicator

Green

Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.

Slow blinking: The card software is running properly.

Fast blinking: The card software is starting.

Red

Steady on: The card has failed and the fault requires manual intervention.

Yellow

Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

Figure 8-61 Ports on the ET1D2G48TEA0 panel

1 Forty-eight 10/100/1000BASE-T electrical ports
10/100/1000BASE-T electrical ports

Table 8-117 lists the attributes of a 10/100/1000BASE-T electrical port.

Table 8-117 10/100/1000BASE-T electrical port attributes

Attribute

Description

Connector type

RJ45

Standards compliance

IEEE 802.3ab

Frame format

Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Network protocol

IP

Specifications

Table 8-118 Specifications of the ET1D2G48TEA0

Item

Description

Physical specifications

  • Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.)
  • Weight: 2.50 kg (5.51 lb)
  • Maximum power consumption: 62 W

Environment specifications

  • Operating temperature: 0°C to 45°C (32°F to 113°F)
  • Operating relative humidity: 5% RH to 95% RH (noncondensing)
  • Storage temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage relative humidity: 5% RH to 95% RH (noncondensing)

Ordering Information

Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

Table 8-119 Ordering information
Part Number Card Description Card Model
03030SGN 48-port 10/100/1000BASE-T interface card (EA, RJ45) ET1D2G48TEA0
Translation
Download
Updated: 2019-12-11

Document ID: EDOC1000047496

Views: 215973

Downloads: 2027

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next