No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX210 Switch Module V100R001 User Guide 14

This document describes the CX210 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transferring Files Using SFTP

Transferring Files Using SFTP

Transfer files on the local computer using SFTP.


msftpsrvr.exe: a piece of free software.


  1. The SFTP service has been enabled on the destination device.
  2. Double-click msftpsrvr.exe.

    The Core FTP mini-sftp-server dialog box is displayed, as shown in Figure 6-11.

    Figure 6-11 Core FTP mini-sftp-server

  3. Set the parameters as prompted:

    The parameter descriptions are displayed as follows:

    • User: specifies the username for logging in to the SFTP server.
    • Password: specifies the password for logging in to the SFTP server.
    • Port: specifies the port number, which is 22.
    • Root path: specifies the home directory of the SFTP server.

  4. Click Options, and enter the SFTP server IP address in IP/Address, for example,
  5. Click Start.

    The file transfer page is displayed.

Updated: 2019-08-09

Document ID: EDOC1000053379

Views: 23149

Downloads: 618

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next