No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX210 Switch Module V100R001 User Guide 14

This document describes the CX210 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the FC Switching Plane

Configuring the FC Switching Plane

This topic describes how to use the MM910 and Brocade Fabric OS CLI to configure the MX210 mezzanine switch module (FC switching plane).

You are advised to use the MM910 to perform any operation that the MM910 supports to improve operation efficiency.

At the first login to the MX210 switch module, promptly change its IP address and default password, and configure zones based on application scenarios.

Updated: 2019-08-09

Document ID: EDOC1000053379

Views: 22003

Downloads: 618

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next