No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX210 Switch Module V100R001 User Guide 14

This document describes the CX210 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the Local KVM Connected to the MM910

Using the Local KVM Connected to the MM910

Scenarios

Use the local keyboard, video, and mouse (KVM) to perform any of the following operations:

  • Log in to the MM910 command-line interface (CLI).
  • Log in to the OS of a compute node.
  • Mount the DVD-ROM drive to a compute node.
  • Access a compute node or switch module over serial over LAN (SOL).

The local KVM function of the MM910 has the following restrictions:

  • The CLI does not provide the text editor function.
  • The login to the system serial port of the compute node over SOL by using the local KVM is supported.
NOTE:

For security purposes, run the exit command to exit the CLI when you do not need to use the KVM. Once you have accessed the CLI of the active or standby MM910 or SOL screen (shown in Figure 6-4) and the timeout timer has not expired, you can access the MM910 without entering the user name and password again.

Prerequisites

Data

  • User name and password for logging in to the MM910
  • User name and password for logging in to the compute node or switch module

Procedure

  1. Log in to the MM910 CLI.
  2. Connect the keyboard and mouse to the USB ports of the MM910.
  3. Use a VGA cable to connect the monitor to the VGA port of the MM910.

    The main screen is displayed, as shown in Figure 6-4.

    Figure 6-4 KVM main screen

    On the main screen:

    • Press , , , or to select, and press Enter to enter the OS of the compute node in the specified slot.
    • Press , , , or to select, and press Enter to mount the CD-ROM drive of the MM910 to the compute node in the specified slot. The CD-ROM drive color of the MM910 represents the status of the connection to the compute node.
      • indicates that the CD-ROM drive is mounted to the compute node.
      • indicates that the CD-ROM drive is open.
      • indicates that data is being accessed.

  4. Perform operations on the menu as prompted. For example, press CTRL+S.

    Go to the SOL CLI. The following information is displayed:

    *=====================================================================* 
    *             Welcome to SMM SOL Server                               * 
    *     Please log in with SMM account and password.                    * 
    *=====================================================================* 
     
     
    user name:
    NOTE:

    To go to the previous screen, press Ctrl+Shift+Alt. To go to the KVM main screen, press CTRL+R.

  5. Enter the MM910 user name and password.

    The CLI for selecting a slot is displayed.

    Log in Success! 
     
    *=============================================================================== 
          please input the SOL Blade1~Blade16(1 ~ 16), Blade1A~Blade16A(17 ~ 32), Swi1~Swi4(33 ~ 36) and COM#(n) 
          press Ctrl+R to return                              
    *=============================================================================== 
     
     
    Blade1~Blade16(1 ~ 16) 
    Blade1A~Blade16A(17 ~ 32) 
    Swi1~Swi4(33 ~ 36) 
    Please input your choice:

    The sequence numbers in the preceding information are described as follows:

    • 1-32 indicate the compute nodes in slots 1 to 32 respectively.
    • 33-36 indicate the switch modules in slots 1E, 2X, 3X, and 4E respectively.

  6. Enter the slot number of the compute node or switch module to be connected. For example, enter 34 and press Enter.

    • The secreen for selecting the serial port is displayed.

      All serial ports on the server to be connected are displayed as follows:

      Please input your choice:34 
      1 BMCcom 
      2 fabriccom 
      3 baseccom 
      4 FCcom 
      COM#(1 ~ 4)
    • If an SOL connection has been connected through the serial port, a message will be displayed asking you whether to forcibly disconnect the existing SOL connection.
      • Press Y to forcibly disconnect the existing SOL connection.
      • Press N to not disconnect the existing SOL connection. The system stays at the current screen.

  7. Enter the number of a serial port to be connected. For example, enter 1 and press Enter.

    • The serial port CLI is displayed.
    • If another user has logged in to the serial port, a message will be displayed asking you whether to forcibly log out the user.
      • Press Y to forcibly log out the user.
      • Press N to not forcibly log out the user. The system stays at the current screen.

  8. Enter the user name and password for connecting the serial port.

    Perform configuration and query operations on the serial port CLI.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000053379

Views: 22090

Downloads: 618

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next