No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX210 Switch Module V100R001 User Guide 14

This document describes the CX210 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators

Indicators

This topic describes the names, meanings, colors, descriptions and working status of the indicators on the CX210.

By observing the indicators, you can determine the current operating status of the CX210. Table 2-5 describes the indicators on the CX210 panel.

Table 2-5 Indicators

Label

Meaning

Color

Description

STAT

Power indicator

Green

  • Off: The CX210 is not powered on.
  • Blinking green: The CX210 is being powered on.
  • Steady green: The CX210 is operating properly.

HLY

Health indicator

Red and green

  • Off: The CX210 is not powered on.
  • Steady green: The CX210 is operating properly or has minor alarms.
  • Blinking red (1 Hz): A major alarm is generated.
  • Blinking red (at 5 Hz): A critical alarm is generated for the CX210, or the CX210 is not securely installed.

OFL

Offline button/indicator (reserved)

N/A

N/A

A

Diagnosis status indicator for the 8G FC optical port

Orange

  • Off: No optical module is installed, or an exception occurs when the port is receiving optical signals. (The L indicator is also off.)
  • Steady orange: The port is not synchronized, and a connection exception occurs.
  • Blinking orange (once/2 seconds): The port is disabled.
  • Blinking orange (twice/second): The port is faulty.

L

Connection status indicator for the 8G FC optical port

Green

  • Off: No optical module is installed, or an exception occurs when the port is receiving optical signals. (The A indicator is also off.)
  • Steady green: The port is normal, and the link is connected.
  • Blinking green (blinking every two seconds): The port is normal but isolated. No link is set up.
  • Blinking green (blinking twice per second): The port is in the diagnosis state.
  • Blinking green (blinking four times per second): The link is properly set up and the port is transmitting data.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000053379

Views: 21921

Downloads: 616

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next