No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX210 Switch Module V100R001 User Guide 14

This document describes the CX210 multi-plane switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic Information Using Web Tools

Configuring Basic Information Using Web Tools

This topic describes how to configure the basic information about the MX210 using Web Tools. The basic information includes the device name, status, and domain ID.

Changing the Device Name

A unique device name helps locate the device quickly on a complicated network. To change the device name for the MX210 switch module, perform the following steps:

Procedure
  1. Log in to the MX210.

    For details, see Logging In to the MX210 Using Web Tools.

  2. On the menu bar of the Web Tools, choose Configure > Switch Admin.

    The Switch Administration dialog box is displayed, as shown in Figure 4-18.

    Figure 4-18 Switch Administration dialog box

  3. Click the Switch tab and enter the name of the new device in Name.
  4. Click Apply. In the displayed dialog box, click Yes.

Setting the Device Status

Enable or disable the MX210 switch module.

Procedure
  1. Log in to the MX210.

    For details, see Logging In to the MX210 Using Web Tools.

  2. On the menu bar of the Web Tools, choose Configure > Switch Admin.

    The Switch Administration dialog box is displayed, as shown in Figure 4-19.

    Figure 4-19 Switch Administration dialog box

  3. Click the Switch tab. In Switch Status, select Enable or Disable.
  4. Click Apply. In the displayed dialog box, click Yes.

Setting a Domain ID

Reset domain IDs for FC switches on the fabric network.

Context

The domain ID of each FC switch on a fabric network must be unique.

Procedure
  1. Disable the MX210.

    For details, see Setting the Device Status.

  2. In Switch Name and Domain ID, set the new Domain ID.
  3. Click Apply.
  4. In Switch Status, select Enable to enable the MX210.
  5. Click Apply. In the displayed dialog box, click Yes.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000053379

Views: 23361

Downloads: 618

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next