About This Document
Overview
This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The following table lists the symbols that may be found in this document.
Symbol |
Description |
|---|---|
 |
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
 |
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
 |
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all changes made in previous issues.
| Issue | Date |
Description |
|---|---|---|
| 26 | 2018-11-21 | Updated ALM-0x00000063 Failed to Read CPU Voltage (CPU, Minor Alarm). |
| 25 | 2018-11-05 | From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number. |
| 24 | 2018-08-08 | Updated ALM-0x08000005 Failed to Read PCIe Card Temperature (PCIe Card, Minor Alarm). |
| 23 | 2018-07-05 | Updated ALM-0x08000003 PCIe Card Overtemperature (PCIe Card, Minor Alarm), ALM-0x08000017 Failed to Read PCIe Card Voltage (PCIe Card, Minor Alarm), and ALM-0x08000005 Failed to Read PCIe Card Temperature (PCIe Card, Minor Alarm). |
| 22 | 2018-05-30 | Added the 0x0200001D alarm. |
| 21 | 2018-05-14 | Updated ALM-0x2C000007 Server Powered Off (System, Major Alarm). |
| 20 | 2018-03-29 | Updated ALM-0x0600000B RAID Controller Card Overtemperature (RAID Controller Card, Minor Alarm). |
| 19 | 2018-02-11 | |
| 18 | 2017-12-28 | Added the 0x12000019, 0x23000031, and 0x24000009 alarms. |
| 17 | 2017-10-27 | Added a parameter for alarm 0x06000007. |
| 16 | 2017-10-12 | The alarms are merged into one document. |
| 15 | 2017-08-04 | The C30 alarms are updated. |
| 14 | 2017-07-30 | The C50 alarms are updated. |
| 13 | 2017-07-07 | The alarms about V3 servers are changed. |
| 12 | 2017-06-01 | The C50 alarms are updated. |
| 11 | 2017-05-01 | The sensor name of 0x0147FFFF alarm is changed. |
| 10 | 2016-12-01 | The name of 0x0C07FFFF alarm is changed. |
| 09 | 2016-10-28 | Some descriptions are changed. |
| 08 | 2016-09-10 | Some sensor names are changed. |
| 07 | 2016-07-13 | Syntax is changed. |
| 06 | 2015-11-27 | Some power supply alarms are updated. |
| 05 | 2015-04-20 | ALM-0x2100FFFF Fault Status (ExpN Status) is updated. |
| 04 | 2015-03-20 | This updated document is available for all the rack servers. |
| 03 | 2014-12-24 | The products' names are updated. |
| 02 | 2014-10-25 | Temperature Alarms is updated. |
| 01 | 2014-04-20 | The issue is the first official release. |
Previous
