No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x08000097 Initialization of the PCIe Plug-in RAID Controller Card Abnormal (PCIe Card, Major Alarm)

ALM-0x08000097 Initialization of the PCIe Plug-in RAID Controller Card Abnormal (PCIe Card, Major Alarm)

Description

Alarm message:

Initialization of the [arg1] PCIe card arg2 (arg3) is abnormal.

This alarm is generated when the controller initialization of the PCIe plug-in RAID controller card was abnormal.

Alarm object: PCIe card

Attribute

Alarm ID Alarm Severity Auto Clear

0x08000097

Major

Yes

Parameters

Name Meaning

arg1

Location of the PCIe card. For example, front, inner, or rear.

arg2

Slot number of the PCIe card.

arg3

It is RAID.

Impact on the System

Services related to the RAID controller card are affected.

Possible Causes

The initialization of the RAID controller card is abnormal.

Procedure

  1. Reseat the RAID controller card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Replace the RAID controller card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Replace the server mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

  4. Contact Huawei technical support.
Download
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 328382

Downloads: 3058

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next