No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x2100000F No SD Card Detected (SD Card, Major Alarm)

ALM-0x2100000F No SD Card Detected (SD Card, Major Alarm)

Description

Alarm message:

The SD card controller cannot detect two SD cards. 

This alarm is generated when the SD card controller cannot detect either of the SD cards.

Alarm object: SD card

NOTE:
  • This alarm also applies to SATADOM and M.2 disks.

  • For details about the SD card slot information, see the user guide of the server you use.

Attribute

Alarm ID Alarm Severity Auto Clear

0x2100000F

Major

Yes

Parameters

Name Meaning

-

-

Impact on the System

The SD card is malfunctioning, and related services are affected.

Possible Causes

  • The SD cards are removed.
  • The SD cards are not installed properly.
  • The SD card controller is faulty.

Procedure

  1. Check whether all the SD cards are installed.

    • If yes, go to 3.

    • If no, go to 2.

  2. Install all SD cards required. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Remove and reinstall the SD card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

  4. Replace the SD card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 5.

  5. Replace the mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 6.

  6. Contact Huawei technical support.
Download
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 332575

Downloads: 3062

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next