No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC Alarm Handling 31

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x08000021 PCIe Card Firmware Initialization Error (PCIe Card, Major Alarm)

ALM-0x08000021 PCIe Card Firmware Initialization Error (PCIe Card, Major Alarm)

Description

Alarm message (iBMC versions earlier than V312):

The [arg1] PCIe card arg2 (arg3) arg4 has a firmware initialization alarm [arg5].

Alarm message (iBMC V312 or later):

The [arg1] PCIe card arg2 (arg3) arg4 has a firmware initialization alarm [arg5]. [arg6] [arg7]

This alarm is generated when an error is detected during the firmware initialization of the PCIe card.

Alarm object: PCIe card

Attribute

Alarm ID Alarm Severity Auto Clear

0x08000021

Major

Yes

Parameters

Name Meaning

arg1

Location of the PCIe card. For example, front or rear.

arg2

Slot number of the PCIe card, for example, 1 or 2.

arg3

Type of the PCIe card, for example, M60 GPU.

arg4

Module of the PCIe card. For example, CDR or MAC address.

arg5

Object where the error occurred. For example, CDR0 or Eth1.

arg6

Supplementary information about the alarm, for example, Error Code.

NOTE:

This parameter is available only for iBMC V312 and later versions.

arg7

Error code of the alarm, for example, (7168).

NOTE:

This parameter is available only for iBMC V312 and later versions.

Impact on the System

The system installed on the PCIe card may fail to start.

Possible Causes

An exception occurs during the PCIe card firmware initialization, such as the BIOS CRC/CDR/black box memory module/MAC address initialization.

Procedure

  1. Upgrade the PCIe card firmware to the latest version. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Contact Huawei technical support.
Download
Updated: 2019-11-19

Document ID: EDOC1000054724

Views: 393822

Downloads: 3176

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next