No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x08000025 PCIe Card Watchdog Timed Out (PCIe Card, Major Alarm)

ALM-0x08000025 PCIe Card Watchdog Timed Out (PCIe Card, Major Alarm)

Description

Alarm message:

The [arg1] PCIe card arg2 (arg3) has a watchdog timeout alarm during arg4.

This alarm is generated when the watchdog timer expired during certain process of the PCIe card.

Alarm object: PCIe card

Attribute

Alarm ID Alarm Severity Auto Clear

0x08000025

Major

Yes

Parameters

Name Meaning
arg1

Location of the PCIe card. For example, front or rear.

arg2

Slot number of the PCIe card, for example, 1 or 2.

arg3

Type of the PCIe card, for example, M60 GPU.

arg4

System status. For example, BIOS loading, OS loading, or OS running.

Impact on the System

The initialization of the PCIe card cannot be performed successfully, and the timeout may reset the PCIe card.

Possible Causes

  • The BIOS loading failed on the PCIe card.
  • The OS loading failed on the PCIe card.
  • The watchdog expires during the OS running.

Procedure

  1. Upgrade the PCIe card software to the latest version. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Contact Huawei technical support.
Download
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 241017

Downloads: 2945

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next