No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 31

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x1202FFFF System Error (System Error)

ALM-0x1202FFFF System Error (System Error)


Alarm message:

System error. Please check the SEL for root cause.

This alarm is generated when the management software detects an error that may cause the system to restart or stop responding.

Sensor triggering the alarm: System Error


Alarm ID Alarm Severity Auto Clear




Impact on the System

The system may restart or stop responding, which reduces system stability.

Possible Causes

A hardware fault occurs.


  1. Collect iBMC and OS logs.
  2. Send the iBMC log to Huawei technical support for further analysis.
  3. Send the OS log to the OS vendor for further analysis.
Updated: 2019-11-19

Document ID: EDOC1000054724

Views: 396694

Downloads: 3202

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next