No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x1A00002F NAND Flash Service Life Lower Than Threshold (BMC, Major Alarm)

ALM-0x1A00002F NAND Flash Service Life Lower Than Threshold (BMC, Major Alarm)


Alarm message:

The service life of the NAND flash is less than arg1. 

This alarm is generated when the system detects that the remaining service life of the iBMC Nand flash is lower than the threshold.

Alarm object: BMC


Only iBMC V296 and later support this alarm.


Alarm ID Alarm Severity Auto Clear





Name Meaning


NAND flash service life threshold, for example, 95 or 90.

Impact on the System

The iBMC cannot operate properly.

Possible Causes

The remaining service life of the iBMC NAND flash reaches the threshold.


  1. Replace the mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 332587

Downloads: 3063

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next