No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0D08FFFF RAID Rebuild Aborted (SDN CARD)

ALM-0x0D08FFFF RAID Rebuild Aborted (SDN CARD)


Alarm message:

RAID rebuild Aborted

The SD card controller integrated on the mainboard forms a RAID 1 array for the two SD cards to improve SD card data security.

This alarm is generated when a single SD card is faulty and the SD card controller detects a RAID rebuild failure.

Sensor triggering the alarm: SDN CARD


Alarm ID Alarm Severity Auto Clear





Name Meaning

Indicates an SD card number.


For details about the SD slot information, see the user guide of the server you use.

Impact on the System

The RAID array formed by SD cards fails and the system fault tolerance capability is reduced.

Possible Causes

The SD card is faulty.


  1. Replace the SD card indicated in the alarm. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 267224

Downloads: 2986

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next