No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 31

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0149FFFF Above Upper Major Threshold (SYS 3.3V)

ALM-0x0149FFFF Above Upper Major Threshold (SYS 3.3V)


Alarm message:

Above upper major threshold

This alarm is generated when the voltage of the SYS 3.3V sensor on the mainboard is higher than the major alarm upper threshold.

Sensor triggering the alarm: SYS 3.3V


Alarm ID Alarm Severity Auto Clear




Impact on the System

The system cannot be properly powered on.

Possible Causes

The mainboard is faulty.


  1. Replace the mainboard. Check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-11-19

Document ID: EDOC1000054724

Views: 394754

Downloads: 3200

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next