No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0341FFFF PCIe Error (RAIDN PCIE ERR/NICN Status/MezzN Status)

ALM-0x0341FFFF PCIe Error (RAIDN PCIE ERR/NICN Status/MezzN Status)

Description

Alarm message:

PCIe Error

This alarm is generated when the management software detects a critical alarm of a RAID controller card, LOM (LAN on Motherboard), or mezzanine card.

Sensor triggering the alarm:

  • RAIDN PCIE ERR
  • NICN Status
  • MezzN Status

Attribute

Alarm ID Alarm Severity Auto Clear

0x0341FFFF

Critical

Yes

Parameters

Name Meaning
N

indicates the slot number of a RAID card, a LOM, or a mezzanine card.

If the server supports only one RAID controller card or mezzanine card, the corresponding sensor names do not include N.

Impact on the System

The system may restart or stop responding.

Possible Causes

The PCIe device is faulty.

Procedure

  1. Gracefully power off the server and check whether the PCIe device or slot is faulty or poorly connected.

    • If yes, go to 4.

    • If no, go to 2.

  2. Power on the server to start the power-on self-test (POST) and then run test software (just as FusionServer Toolkit). Check whether the POST succeeds and the test software finds no fault.

    For details about the download address and the operation methods about FusionServer Toolkit, see FusionServer Tools V2R2 Toolkit User Guide.

    • If yes, go to 3.

    • If no, go to 4.

  3. Check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

  4. Replace the part that may be faulty. Then check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 5.

  5. Contact Huawei technical support.
Download
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 266250

Downloads: 2984

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next