No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 31

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0441FFFF Predictive Failure Detected (LCD Status)

ALM-0x0441FFFF Predictive Failure Detected (LCD Status)


Alarm message:

Predictive Failure Detected

This alarm is generated when the communication between the LCD and the PME is abnormal.

Sensor triggering the alarm: LCD Status


Alarm ID Alarm Severity Auto Clear




Impact on the System

The login from the LCD fails. As a result, information query and simple configuration cannot be performed using the LCD.

Possible Causes

The serial cable to the LCD is faulty or the LCD is removed.


  1. Check whether the LCD is removed.

    • If yes, go to 2.

    • If no, go to 3.

  2. Install the LCD. Then check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Contact Huawei technical support.
Updated: 2019-11-19

Document ID: EDOC1000054724

Views: 416055

Downloads: 3262

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next