No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x2100FFFF PCIe Error (PCIE Status)

ALM-0x2100FFFF PCIe Error (PCIE Status)


Alarm message:

PCIe Error, PCIe Slot N

This alarm is generated when a standard PCIe device error is detected.

Sensor triggering the alarm: PCIE Status


Alarm ID Alarm Severity Auto Clear





Name Meaning
N PCIe device slot number.

Impact on the System

The standard PCIe device cannot be used.

Possible Causes

The standard PCIe device is faulty.


  1. Gracefully power off the server and check whether the standard PCIe device or slot is faulty or poorly connected.

    • If yes, go to 4.

    • If no, go to 2.

  2. Power on the server to start the power-on self-test (POST) and then run test software (just as FusionServer Toolkit). Check whether the POST succeeds and the test software finds no fault.

    For details about the download address and the operation methods about FusionServer Toolkit, see FusionServer Tools V2R2 Toolkit User Guide.

    • If yes, go to 3.

    • If no, go to 4.

  3. Check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

  4. Replace the part that may be faulty. Then check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 5.

  5. Contact Huawei technical support.
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 262413

Downloads: 2973

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next