No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x02000029 Hard Disk Foreign Configuration (Disk, Minor Alarm)

ALM-0x02000029 Hard Disk Foreign Configuration (Disk, Minor Alarm)


Alarm message:

The [arg1] disk arg2 has foreign configuration (SN: arg3, PN: arg4).

From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number.

This alarm is generated when foreign configuration is detected for a hard disk.


If arg2 is DISKA, DISKB, DISKC, or DISKD, this alarm is generated for the rear hard disk of a V2 or V3 server. For details about the slot information of the hard disks on a V3 server, see "Removing a Hard Disk" in the user guide of the server you use.

Alarm object: disk


This alarm also applies to SATADOM and M.2 disks.


Alarm ID Alarm Severity Auto Clear





Name Meaning


Location of the hard disk. For example, FM or CMn.


Slot number of the hard disk.


Disk serial number.


Part number.

Impact on the System

Services related to the faulty hard disk are affected, and data is lost.

Possible Causes

The newly installed hard disk contains foreign configuration.


  1. Clear or import the RAID configuration. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 331723

Downloads: 3061

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next