No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Alarm Description

Alarm Description

Alarm Syntax

On the iBMC WebUI, the alarm information includes the following parameters:

  • Severity
  • Object type
  • Description
  • Generation time
  • Event code
  • Handling suggestions

For details, see Current Alarms of the iBMC WebUI.

On the iBMC CLI, the alarm information includes Event Num, Event Time, Alarm Level, and Event Description.

Alarm Message Description

This document describes alarms from the following aspects:

  • Description

    Provides the following information:

    • Alarm message
    • Conditions for generating and clearing the alarm.
    • Object for which the alarm was generated.
  • Attribute

    • Alarm ID: a hexadecimal code that uniquely identifies an alarm.

    • Alarm severity: level of the impact exerted by a fault corresponding to an alarm.

    • Auto Clear: indicates whether the alarm can be automatically cleared after the fault is rectified.

  • Parameters

    Describes the parameters contained in the alarm information.

  • Impact on the System

    Describes the impact on the system.

  • Possible Causes

    Provides possible causes of the alarm.

  • Procedure

    Describes the procedure of rectifying the fault corresponding to the alarm.

Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 330675

Downloads: 3060

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next