No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x03000009 PSU Fault (PSU, Major Alarm)

ALM-0x03000009 PSU Fault (PSU, Major Alarm)


Alarm message:

PSU arg1 failure (SN: arg2, PN: arg3). 

From iBMC V328, the RAID controller card and PSU alarms will also include the SN and BOM code, and the fan alarms will also include the BOM code.

This alarm is generated when the output voltage of a PSU is out of the normal range.

Alarm object: PSU


Alarm ID Alarm Severity Auto Clear





Name Meaning


No. of the PSU.


SN of the PSU.


Part number.

Impact on the System

System power supply is affected.

Possible Causes

The PSU is faulty.


  1. Replace the PSU. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 331655

Downloads: 3061

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next