No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x27000015 PCH PRIM 1.05 V Overvoltage (PCH, Major Alarm)

ALM-0x27000015 PCH PRIM 1.05 V Overvoltage (PCH, Major Alarm)


Alarm message:

The PCH PRIM 1V05 voltage (arg1 V) exceeds the overvoltage threshold (arg2 V). 

This alarm is generated when the PCH PRIM 1 V05 voltage exceeds the overvoltage threshold.

Alarm object: PCH


Alarm ID Alarm Severity Auto Clear





Name Meaning


Current reading of the sensor.


Alarm threshold.

Impact on the System

The system stops responding.

Possible Causes

The mainboard is faulty.


  1. Replace the mainboard. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 332655

Downloads: 3063

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next