No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 27

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0F000011 Riser Card Power Supply Failed (PCIe Riser, Major Alarm)

ALM-0x0F000011 Riser Card Power Supply Failed (PCIe Riser, Major Alarm)

Description

Alarm message:

PCIe riser card arg1 power failure. 

This alarm is generated when the PCIe riser card power supply failed.

Alarm object:PCIe Riser

Attribute

Alarm ID Alarm Severity Auto Clear

0x0F000011

Major

Yes

Parameters

Name Meaning
arg1 Voltage detection point.For example, 3V3 or 12V0

Impact on the System

The PCIe card on the riser card cannot be used, and related services are interrupted.

Possible Causes

The PCIe Riser card is faulty.

Procedure

  1. Replace the faulty riser card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Download
Updated: 2019-02-28

Document ID: EDOC1000054724

Views: 218060

Downloads: 2920

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next