No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x2C000067 CPU and Chassis Mismatch (System, Major Alarm)

ALM-0x2C000067 CPU and Chassis Mismatch (System, Major Alarm)


Alarm message:

The chassis does not support high-power CPUs. 

From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number.

This alarm is generated when the system detects high-power CPUs, which are not supported by the server chassis.

Alarm object: system


Alarm ID Alarm Severity Auto Clear





Name Meaning



Impact on the System

High-power CPUs may damage the chassis.

Possible Causes

The CPU rated power is larger than the power supported by the server chassis.


  1. Use low-power CPUs. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 242602

Downloads: 2949

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next