No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0800001B PCIe Card Hardware Fault (PCIe Card, Major Alarm)

ALM-0x0800001B PCIe Card Hardware Fault (PCIe Card, Major Alarm)


Alarm message:

A hardware fault (arg1) occurs in [arg2] PCIe card arg3 (arg4).

This alarm is generated when a hardware fault is detected on the PCIe card.

Alarm object: PCIe card


Alarm ID Alarm Severity Auto Clear





Name Meaning


Description of the hardware fault. For example, system power loss or core clock signal loss.


Location of the PCIe card. For example, front or rear.


Slot number of the PCIe card, for example, 1 or 2.


Type of the PCIe card, for example, M60 GPU.

Impact on the System

The PCIe card cannot work normally.

Possible Causes

The PCIe card is faulty.


  1. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 335082

Downloads: 3066

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next