No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0100004D DCPMM Warning (Memory, Minor Alarm)

ALM-0x0100004D DCPMM Warning (Memory, Minor Alarm)

Description

Alarm message:

DCPMM (arg1 arg2) has a noncritical fault. error code: 0xarg3 (SN: arg4, PN: arg5).
NOTE:

From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number.

This alarm is generated when a minor fault was detected on the DCPMM.

Alarm object: memory

Attribute

Alarm ID Alarm Severity Auto Clear

0x0100004D

Minor

Yes

Parameters

Name Meaning

arg1

CPU socket number and channel number. For example, in a 2488 V5 server, CPU 1 channel 2 indicates the number 2 memory channel of CPU 1, that is, DIMMs DIMM020 and DIMM021.
NOTE:

The number of DIMMs corresponding to a memory channel varies depending on the server model.

You can obtain the CPU socket number and channel number corresponding to a DIMM from the server user guide. For example, if you use a 2488 V5 server, see Components > DIMM Slot Locations in the 2488 V5 Server V100R005 User Guide.

arg2

CPU socket number and DIMM silkscreen, for example, CPU1 DIMM020(A) or CPU2 DIMM110(B).

arg3

Error code of the alarm.

arg4

Memory serial number.

arg5

Part number.

Impact on the System

The DCPMM will be damaged or cannot be used.

Possible Causes

  • The memory endurance is about to reach the limit.

  • The memory space is about to be used up.

  • A warning is returned in CAP self-check.

Procedure

  1. Migrate data from the DCPMM to other storage media, and replace the DCPMM. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Download
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 262740

Downloads: 2975

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next