No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 27

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0800001F PCIe Card DIMM Fault (PCIe Card, Major Alarm)

ALM-0x0800001F PCIe Card DIMM Fault (PCIe Card, Major Alarm)

Description

Alarm message (iBMC versions earlier than V312):

The [arg1] PCIe card arg2 (arg3) arg4 is arg5.

Alarm message (iBMC V312 or later):

The [arg1] PCIe card arg2 (arg3) arg4 is arg5. [arg6] [arg7]

This alarm is generated when a DIMM fault is detected on the PCIe card.

Alarm object: PCIe card

Attribute

Alarm ID Alarm Severity Auto Clear

0x0800001F

Major

Yes

Parameters

Name Meaning
arg1

Location of the PCIe card. For example, front or rear.

arg2

Slot number of the PCIe card, for example, 1 or 2.

arg3

Type of the PCIe card, for example, M60 GPU.

arg4

Silkscreen of the DIMM on the PCIe card. For example, DIMM00 or DIMM10.

arg5

Description of the DIMM fault. For example, not detected or isolated.

arg6

Supplementary information about the alarm, for example, Error Code.

NOTE:
This parameter is available only for iBMC 3.12 and later versions.
arg7 Error code of the alarm, for example, (7168).
NOTE:
This parameter is available only for iBMC 3.12 and later versions.

Impact on the System

The PCIe card cannot start, and services related to the PCIe card are affected.

Possible Causes

The PCIe card is faulty.

Procedure

  1. Check whether the DIMM is installed.

    • If yes, go to 2.

    • If no, go to 3.

  2. Remove and reinstall the DIMM. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

  3. Install a DIMM. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

  4. Replace the PCIe card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  5. Contact Huawei technical support.
Download
Updated: 2019-02-28

Document ID: EDOC1000054724

Views: 220516

Downloads: 2927

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next