No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 27

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x00000083 Insufficient PCIe MMIO Resources (CPU, Critical Alarm)

ALM-0x00000083 Insufficient PCIe MMIO Resources (CPU, Critical Alarm)

Description

Alarm message:

The PCIe MMIO configuration space in CPU arg1 is insufficient (SN: arg2, PN: arg3).
NOTE:

From iBMC V316, the CPU and disk alarms will also include the SN and part umber and the mainboard and memory alarms will also include the part number.

This alarm is generated when insufficient PCIe memory-mapped I/O (MMIO) resources are detected for the CPU.

Alarm object: CPU

Attribute

Alarm ID Alarm Severity Auto Clear

0x00000083

Critical

Yes

Parameters

Name Meaning
arg1

Socket NO. of the CPU.

arg2

CPU serial number.

arg3

Part number.

Impact on the System

Some PCIe cards are affected.

Possible Causes

The total I/O resources required by the PCIe cards connected to the CPU exceeds the maximum I/O resources provided by the CPU.

Procedure

  1. Check whether the PCIe cards comply with the server installation guidelines.

    For details about the PCIe card installation guidelines, see the user guide of the server you use.

    • If yes, go to 3.

    • If no, go to 2.

  2. Power off the server and install the PCIe cards according to the installation guidelines. After the server is powered on, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Contact Huawei technical support.
Download
Updated: 2019-02-28

Document ID: EDOC1000054724

Views: 221302

Downloads: 2928

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next