No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC Alarm Handling 30

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x3A000001 SD Card RAID Controller Fault (SD Controller, Minor Alarm)

ALM-0x3A000001 SD Card RAID Controller Fault (SD Controller, Minor Alarm)


Alarm message:

SD RAID controller failure. 

This alarm is generated when the RAID controller on the SD card is faulty.

Alarm object: SD controller


For details about the SD card slot information, see the user guide of the server you use.


Alarm ID Alarm Severity Auto Clear





Name Meaning

Impact on the System

RAID card services are affected.

Possible Causes

The RAID controller on the SD card is faulty.


  1. Replace the RAID controller on the SD card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 2.

  2. Contact Huawei technical support.
Updated: 2019-08-05

Document ID: EDOC1000054724

Views: 332665

Downloads: 3063

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next