No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC Alarm Handling 28

This document describes iBMC alarms in terms of the meaning, impact on the system, possible causes, and handling suggestions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x0705FFFF Configuration Error (CPUN Status)

ALM-0x0705FFFF Configuration Error (CPUN Status)

Description

Alarm message:

Configuration error

This alarm applies only to the RH8100 V3 only.

This alarm is generated if any of the following is detected during system startup.

  • A PCIe card that requires I/O resources is installed in an incorrect slot.
  • An unsupported CPU is installed.
NOTE:
For details about the CPUs supported by the server, see the Server Compatibility Checker.

This alarm is generated by the following sensor:

  • CPUN Status

Attribute

Alarm ID Alarm Severity Auto Clear

0x0705FFFF

Critical

Yes

Parameters

Name Meaning
N

Serial number of the CPU.

Impact on the System

The system fails to start.

Possible Causes

  • A PCIe card that requires I/O resources is installed in an incorrect slot.
  • An unsupported CPU is installed.

Procedure

  1. Check whether a PCIe card requiring I/O resources is installed in an incorrect slot.

    • If yes, go to 2.

    • If no, go to 3.

  2. Install the PCIe card in a correct slot to conform to I/O resource allocation rules. Then check whether the alarm is cleared.

    For details about I/O resource allocation rules, see the server user guide.

    • If yes, no further action is required.

    • If no, go to 3.

  3. Check whether an unsupported CPU is installed.

    • If yes, go to 4.

    • If no, go to 5.

  4. Replace the unsupported CPU with a compatibleone. Then, check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 5.

  5. Contact Huawei technical support.
Download
Updated: 2019-06-04

Document ID: EDOC1000054724

Views: 265047

Downloads: 2984

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next